61 replies to this topic

[acordill]

Thank you Hashcode for all your hard work on SafeStrap. You and the work that you do are greatly appreciated!!

[mmarten66]

Installed SS3 withe the instructions provided, after install was successful rebooted phone and no splash screen goes to the droid eye and goes no further. Am i bricked? Also was on SS2.11 and uninstalled beforehand.

[jagman]

Makes me nervous. I wish HC would have a thread of his own for SS 3.04 The fact that there isn't one makes me think this is still beta. Time will tell. I DL it but am holding of til I see explicit instructions on installation.

Sent from my Droid RAZR MAXX using Tapatalk 2

[newms323]

It is beta. But public beta. You can read his install instructions on his blog.

Sent from my DROID SPYDER using Xparent SkyBlue Tapatalk 2

[newms323]

Please Login or Register to see this Hidden Content

Sent from my DROID SPYDER using Xparent SkyBlue Tapatalk 2

[SpyderMan]

Jagman, according to what HC himself wrote in his blog,

it IS beta…

[dragon]

just read a tweet Hash said make sure you only upgrade safestrap from the stock side currently... So I'm taking it as the unsafe side??

[newms323]

Yes, go to non safe, uninstall old recovery and apk. Then install new one

Sent from my DROID SPYDER using Xparent SkyBlue Tapatalk 2

[Rycix]

Installed SS3 withe the instructions provided, after install was successful rebooted phone and no splash screen goes to the droid eye and goes no further. Am i bricked? Also was on SS2.11 and uninstalled beforehand.

You probably weren't on stock/unsafe.

just read a tweet Hash said make sure you only upgrade safestrap from the stock side currently... So I'm taking it as the unsafe side??

To be honest, you should be able to do it if you uninstalled on safe side; wiping data should allow you to boot on stock if you uninstall safestrap from the safe side. I did it once. (I did it on 2.0, I don't know if the way safestrap is changed from 2.0 to 2.11 would not make this method effective).
I would not recommend doing the direct install via the app on the safe side, which is probably what hash was referring to not do. As it is a major jump, I would recommend fastbooting to clear up the entire phone. Also since safestrap 3 keeps the stock partitions playing nicely, you probably should fastboot before upgrading to 3 in general (though it might not be required)

[studiorat]

Installed SS3 withe the instructions provided, after install was successful rebooted phone and no splash screen goes to the droid eye and goes no further. Am i bricked? Also was on SS2.11 and uninstalled beforehand.

I did the same as well and yielded the same result......I restored using Batman1.8.2 and rerooted and am off to try it again.....because I am an idiot like that.....woohoo!!!!! thanx hashcode......

[studiorat]

I did the same as well and yielded the same result......I restored using Batman1.8.2 and rerooted and am off to try it again.....because I am an idiot like that.....woohoo!!!!! thanx hashcode......

I also realized I was safe on !!! just disabled safe and am rebooting to delete 2.11

[loonie01]

I did the same bone head mistake. I didn't go back to safe side. Well ateast I have a clean install. lol

[jmp485]

Installed SS3 withe the instructions provided, after install was successful rebooted phone and no splash screen goes to the droid eye and goes no further. Am i bricked? Also was on SS2.11 and uninstalled beforehand.

Did you move the safestrap directory from your internal sd card while you were still on your non-safe side? I did that and ran into the same wall you did when I tried to go over to my safe side. Booted back into the non-safe side, copied that back onto the internal SD card and then went back over to the safe side and had no problems that time.

[studiorat]

All Good Here!!!!! installed HC's JB rom and I will say its Pretty Smooth so Far lovin Life about now....One question? is there a Gapps I need my contacts and Emails...??

[Brandroid1984]

Does anyone know of a way to back up the current rom im running with ssv2.11 and then restore it to v3.04 i know you cant do it via ss but is there like a third party app for nans that would restore once on on ssv3

Sent from my DROID BIONIC using Tapatalk 2

[newms323]

Does anyone know of a way to back up the current rom im running with ssv2.11 and then restore it to v3.04 i know you cant do it via ss but is there like a third party app for nans that would restore once on on ssv3

Sent from my DROID BIONIC using Tapatalk 2

no, you will have to setup up your Rom again. Do you have titanium backup? It's a must have for flashers.

Sent from my XT912 using Xparent SkyBlue Tapatalk 2

[jagman]

I did the same as well and yielded the same result......I restored using Batman1.8.2 and rerooted and am off to try it again.....because I am an idiot like that.....woohoo!!!!! thanx hashcode......

I also did not go to the non-safe side. Ugh. I was in perpetual boot loop with the original red eye. I went into fastboot and used RSD to flash the official 211 code. Let it do its thing wit android dude, yet when it went to reboot it went perpetual boot loop again. I again went into fastboot and powered down from there. At least the phone turned off and I was able to charge it to 100% overnight. Now I need to try again to reflash to stock.

Did you move the safestrap directory from your internal sd card while you were still on your non-safe side? I did that and ran into the same wall you did when I tried to go over to my safe side. Booted back into the non-safe side, copied that back onto the internal SD card and then went back over to the safe side and had no problems that time.

Since I am not seeing the SafeStrap flash even thought I installed 3.04, but it is obviously getting stuck on the bootloop in the stock rom, should I do a hard reset as motorolla suggests

Please Login or Register to see this Hidden Content

?

[jamohlpierce]

Anyone have step by step instruction on how to actually boot rom (cm10) up once successfully installed V3?? I'm not in the mood to bootloop again! lol

[wabmorgan]

Installed SS3 withe the instructions provided, after install was successful rebooted phone and no splash screen goes to the droid eye and goes no further. Am i bricked? Also was on SS2.11 and uninstalled beforehand.

I made the mistake of installing without reading the instructions. What I did was unistall ss3. reinstall ss2.11. Phone still did same. I then re-installed the ROM. The phone re-booted and came up like normal other the a few things the ROM overwrote.

[drewreyes78]

How did you get out of the boot loop to reinstall ss2.11?

I made the mistake of installing without reading the instructions. What I did was unistall ss3. reinstall ss2.11. Phone still did same. I then re-installed the ROM. The phone re-booted and came up like normal other the a few things the ROM overwrote.

[newms323]

You may want to take your questions/concerns to hash`s thread about safe strap. It's in the development section.

Sent from my DROID SPYDER using Xparent SkyBlue Tapatalk 2

[strongbowsix]

I also did not go to the non-safe side. Ugh. I was in perpetual boot loop with the original red eye. I went into fastboot and used RSD to flash the official 211 code. Let it do its thing wit android dude, yet when it went to reboot it went perpetual boot loop again. I again went into fastboot and powered down from there. At least the phone turned off and I was able to charge it to 100% overnight. Now I need to try again to reflash to stock.



Since I am not seeing the SafeStrap flash even thought I installed 3.04, but it is obviously getting stuck on the bootloop in the stock rom, should I do a hard reset as motorolla suggests

Please Login or Register to see this Hidden Content

?

I also went into boot loop. I think my issue may have been that I moved the Safestrap files before disabling Safeside and rebooting maybe? Either way I ended up stuck in a bootloop (Continual Eye).

How I fixed:

• Booted into Safestrap recovery again.
• Did a Factory Reset
• Rebooted and set up google accounts again.
• Reinstalled SS 2.x
• Disabled SS 2.x recovery
• Moved Safestrap directory to SD-EXT
• Uninstalled SS 2.x APK
• Followed Install instructions for SS 3.x

SS 3.x is sweet, thanks!

[nobreak1970]

So far so good on Bionic.
Good stuff man.

[brewzer]

I came from Galaxy Nexus to Razr and I must admit so far loving it. This safestrap is awesome and it was easy to set up, no problems on my end.

My Question:
Can you use Titanium backup to reload your apps in the different roms in each Rom Slot? (before I try it and screw something up).

[androidlearner]

I came from Galaxy Nexus to Razr and I must admit so far loving it. This safestrap is awesome and it was easy to set up, no problems on my end.

My Question:
Can you use Titanium backup to reload your apps in the different roms in each Rom Slot? (before I try it and screw something up).

I have been doing so without any issues so far. I can't speak for anything system related though

Sent from my Droid Razr Maxx Full Throttle

[nybelle]

I disabled safe system, uninstalled recovery, removed the old safestrap, and installed the new safestrap. Now I'm stuck in boot loop. I boot into the new safestrap screen, but clicking menu goes into boot loop, as does clicking continue. Any suggestions??

[dmlsthe1]

I remember reading hash's blog and seeing the reasons he made ss3. One being that he wanted to be able to charge while in recovery. Is that possible in this version? Or is it something he is still working in implementing? If I'm wrong and that's completely off than just say so lol

I disabled safe system, uninstalled recovery, removed the old safestrap, and installed the new safestrap. Now I'm stuck in boot loop. I boot into the new safestrap screen, but clicking menu goes into boot loop, as does clicking continue. Any suggestions??

Sorry but i don't know what's causing that. Rsd? Or Matt's utility?

Sent from DDRMaxx using Xparent ICS Tapatalk 2

[SpyderMan]

dmlsth1 installation of the SS3 update will kill your existing Safe side rom

you have to create a rom slot (top left box in rom slot screen) & then go to the Wipe button- do the wipes the rom's dev requires; then install the rom.

Always be careful to note which rom slot is active & you'll be fine.

[monkteo]

dmlsth1 installation of the SS3 update will kill your existing Safe side rom you have to create a rom slot (top left box in rom slot screen) & then go to the Wipe button- do the wipes the rom's dev requires; then install the rom. Always be careful to note which rom slot is active & you'll be fine.

I personally put the name of the room on the partition created

[Quadroller]

I've got a question on useing safestrap. I've got 4 rom slots created and have four of my favorite roms that I switch back and forth from. My question is is there a way to create the rom slots on the sd-ext instead of the internal card? wit the four rom slots created on the internal card I keep getting the storage is low warning in the notification bar.



Thanks in advance