Jump to content


Photo

Low Battery While Flashing - Known Workarounds

Factory Cable TBH

  • Please log in to reply
36 replies to this topic

#21 chumboy

chumboy

    Member

  • Members
  • PipPip
  • 93 posts

Posted 02 November 2012 - 04:43 AM

This just happened to me.
i tried all the above methods, but no luck.
then found a thread that said to try it this way...

Please Login or Register to see this Hidden Content



worked like a charm

#22 Majormer

Majormer

    Call me Big Papa..

  • Validating
  • PipPip
  • 41 posts
  • Twitter:@MajormerWizard
  • LocationKansas City, MO

Posted 06 November 2012 - 11:33 PM

Chumboy, that technique was listed as Method #4. The risks with that method are outlined in that section.

Also, you could not have tried all the methods I had listed. If so, the factory cable would have worked. The jumper cable does work as well. These methods always work, provided you do them correctly.

#23 race4it

race4it

    n00b

  • Members
  • Pip
  • 2 posts

Posted 09 January 2013 - 01:40 PM

Thanks for the post. I made a factory cable and problem solved. Easy and worked great. Thanks.

#24 Majormer

Majormer

    Call me Big Papa..

  • Validating
  • PipPip
  • 41 posts
  • Twitter:@MajormerWizard
  • LocationKansas City, MO

Posted 12 January 2013 - 04:27 PM

No problem!

Sent from my DROID RAZR using Tapatalk 2



#25 dpd653

dpd653

    n00b

  • Members
  • Pip
  • 14 posts
  • Twitter:@pryanwcs
  • LocationOhio
  • Current Device(s):Moto Razr Maxx

Posted 17 March 2013 - 04:17 PM

Thanks for posting this. I tried a couple of them to no avail. I dont have soder gun. I remember watching my dad do that stuff when I was a kid. I ordered a factory adapter from TBH. So we'll see. I went tonight and reactivated an old school blackberry that was last used in early 2011.

I got tripped up trying to unbrick that part went smooth then the battery got to low trying to reflash JB in recovery. I can start the process in recovery but it wont complete. So I wait.

My question is & it might be stupid. Do I just leave the phone off till the adapter gets here or should I plug in and keep it at the M boot screen? I didnt know if it would matter if it ran all the way down or if keeping it plugged into the wall was kinda holding its battery level but not charging. I have just turned it off and am gonna wait. I dont know where TBH is but I got it shipped priority, so it should be here in 3-5 days.

#26 robocuff

robocuff

    Droid Master

  • Members
  • PipPipPip
  • 415 posts

Posted 17 March 2013 - 04:31 PM

I think you're best off to just leave it off although it doesn't really matter with the factory cable. However, there's nothing to gain from leaving it on either. Also, in case you aren't aware, the factory cable won't charge your phone. It just supplies power so that you can fastboot the phone which gets the charging software back on. Once you're done flashing, you'll more than likely have to charge the phone for a while before you'll be able to boot it without the factory cable plugged in.
  • dpd653 likes this

#27 dpd653

dpd653

    n00b

  • Members
  • Pip
  • 14 posts
  • Twitter:@pryanwcs
  • LocationOhio
  • Current Device(s):Moto Razr Maxx

Posted 17 March 2013 - 04:51 PM

Got it. I appreciate it.

#28 dpd653

dpd653

    n00b

  • Members
  • Pip
  • 14 posts
  • Twitter:@pryanwcs
  • LocationOhio
  • Current Device(s):Moto Razr Maxx

Posted 21 March 2013 - 07:34 PM

Just wanted to mention I went with the Team Black Hat factory adapter for $10. Waited a couple days to arrive and plugged that sexy lil red piece in and she worked like a champ. I know their cables are out of stock but the adapter worked good for me.

#29 Majormer

Majormer

    Call me Big Papa..

  • Validating
  • PipPip
  • 41 posts
  • Twitter:@MajormerWizard
  • LocationKansas City, MO

Posted 22 March 2013 - 09:50 AM

Yeah, I need to update the thread to include the adapter instead. I think it just bridges the two pins together just like the home made factory cable would. And like robocuff said, with the Factory Cable, the battery level doesn't matter as it pulls directly from the USB port for power. But since it bypasses the battery, it also won't charge a phone. Interesting and frustrating fact. Charging always requires that software to work.
  • dpd653 likes this

#30 dpd653

dpd653

    n00b

  • Members
  • Pip
  • 14 posts
  • Twitter:@pryanwcs
  • LocationOhio
  • Current Device(s):Moto Razr Maxx

Posted 22 March 2013 - 11:36 AM

Thanks for posting this Major. I researched all the options and I went with the adapter. I think I might be able to make a cable just might take a couple tries. My girl is still under warranty so I really didnt want to pull the back off just in case I did physical damage to her. I had to reactivate an old blackberry for a couple days till it came in but other than that it was painless. So glad I have that adapter now just in case I get effed like that again and I really appreciate you consolidating a lot of info into one spot.

#31 Memnoch73

Memnoch73

    ~The Devil~

  • Smod
  • 5,016 posts
  • Google+:memnoch73@gmail.com
  • LocationRochester, NY
  • Current Device(s):Pixel 3XL

Posted 22 March 2013 - 11:49 AM

This is great info man. Thanks for this.

I am moving this to the How-to section and pinning it for future reference and help to others with battery issues

Bluesig3_zpsfd248ca4.png

 


#32 Majormer

Majormer

    Call me Big Papa..

  • Validating
  • PipPip
  • 41 posts
  • Twitter:@MajormerWizard
  • LocationKansas City, MO

Posted 30 March 2013 - 08:12 PM

Thank you, Memnoch73!

#33 Majormer

Majormer

    Call me Big Papa..

  • Validating
  • PipPip
  • 41 posts
  • Twitter:@MajormerWizard
  • LocationKansas City, MO

Posted 30 March 2013 - 08:30 PM

I updated the information about the Team Black Hat products. I included details about the adapter, and removed the discouraging information about TBH being out of stock on everything. It still appears that the factory cable itself is out of stock at TBH, but the adapter is still good to go according to the site.

Also, thank you everyone that has sent in likes and messages in PM. However, if you find a certain method working that came from another site, please go to those sites and thank the posters there! Also many kudos to the guys that tirelessly work in the chat room. This guide would not have happened if I didn't have the support from the awesome community here when I had these battery problems myself!
  • cmh714 likes this

#34 tonytico

tonytico

    n00b

  • Members
  • Pip
  • 2 posts
  • Locationusa
  • Current Device(s):droid razr,galaxy tab 2 7.0

Posted 30 September 2013 - 02:55 PM

hi i chose to get the cable i followed the instructions as i understood i have run the razr restore but am still back to no boot this is how it ran "[*] Simple Razr Restore
[*] Windows Version
[*] Created by mattlgroff
[*]
[*] Before continuing, ensure your Razr is in the
[*] "AP Fastboot" mode and connected via USB.
[*]--- Also press the keys after the screen flashes back on when asked---
[*] IF YOUR PHONE SAYS STATUS 1 UNLOCKED EXIT NOW AND EMAIL ME
[*] YOU HAVE AN UNLOCKED BOOTLOADER! ! ! ! !
[*] mattlgroff@gmail.com
[*]
Press any key to continue . . .
        sending 'mbm' (512 KB)... OKAY [  1.016s]
                 writing 'mbm'... OKAY [  0.460s]
     rebooting into bootloader... OKAY [  0.183s]
 Press any key AFTER the screen comes back on
Press any key to continue . . .
   sending 'mbmloader' (42 KB)... OKAY [  0.032s]
           writing 'mbmloader'... OKAY [  0.281s]
        sending 'mbm' (512 KB)... OKAY [  0.460s]
                 writing 'mbm'... OKAY [  0.472s]
     rebooting into bootloader... OKAY [  0.203s]
 Press any key AFTER the screen comes back on
Press any key to continue . . .
    sending 'devtree' (512 KB)... OKAY [  0.619s]
             writing 'devtree'... OKAY [  0.510s]
  sending 'system' (262144 KB)... OKAY [ 64.767s]
              writing 'system'... OKAY [ 24.441s]
  sending 'system' (262144 KB)... OKAY [ 68.939s]
              writing 'system'... OKAY [ 21.309s]
  sending 'system' (130816 KB)... OKAY [ 34.691s]
              writing 'system'... OKAY [ 10.566s]
      sending 'boot' (8192 KB)... OKAY [  3.204s]
                writing 'boot'... INFOPreflash validation failure
FAILED (remote: )
  sending 'recovery' (9216 KB)... OKAY [  4.316s]
            writing 'recovery'... OKAY [  1.842s]
sending 'preinstall' (262144 KB)... OKAY [ 61.888s]
          writing 'preinstall'... OKAY [ 22.229s]
sending 'preinstall' (262144 KB)... OKAY [ 73.821s]
          writing 'preinstall'... OKAY [ 22.009s]
sending 'preinstall' (98304 KB)... OKAY [ 31.460s]
          writing 'preinstall'... OKAY [  8.380s]
    sending 'radio' (21900 KB)... OKAY [  6.491s]
               writing 'radio'... OKAY [  2.607s]
 It is recommened to wipe data, especially if you were on a custom rom.
 If you don't you will probably bootloop and have to wipe anyway...
 Press any key to Wipe the phone's data (NOT SDCARD(S)) or exit the utility.
Press any key to continue . . .
            erasing 'userdata'... OKAY [  0.743s]
               erasing 'cache'... OKAY [  0.090s]
    sending 'radio' (21900 KB)... OKAY [  6.106s]
               writing 'radio'... OKAY [  1.698s]
     rebooting into bootloader... OKAY [  0.128s]
 You are now on stock 6.16.211. Please boot normally by holding down power.

Please make a selection or hit ENTER to return:'PLEASE HELP

 

 



#35 tonytico

tonytico

    n00b

  • Members
  • Pip
  • 2 posts
  • Locationusa
  • Current Device(s):droid razr,galaxy tab 2 7.0

Posted 30 September 2013 - 03:03 PM

hi i chose to get the cable i followed the instructions as i understood i have run the razr restore but am still back to no boot this is how it ran "[*] Simple Razr Restore
[*] Windows Version
[*] Created by mattlgroff
[*]
[*] Before continuing, ensure your Razr is in the
[*] "AP Fastboot" mode and connected via USB.
[*]--- Also press the keys after the screen flashes back on when asked---
[*] IF YOUR PHONE SAYS STATUS 1 UNLOCKED EXIT NOW AND EMAIL ME
[*] YOU HAVE AN UNLOCKED BOOTLOADER! ! ! ! !
[*] mattlgroff@gmail.com
[*]
Press any key to continue . . .
        sending 'mbm' (512 KB)... OKAY [  1.016s]
                 writing 'mbm'... OKAY [  0.460s]
     rebooting into bootloader... OKAY [  0.183s]
 Press any key AFTER the screen comes back on
Press any key to continue . . .
   sending 'mbmloader' (42 KB)... OKAY [  0.032s]
           writing 'mbmloader'... OKAY [  0.281s]
        sending 'mbm' (512 KB)... OKAY [  0.460s]
                 writing 'mbm'... OKAY [  0.472s]
     rebooting into bootloader... OKAY [  0.203s]
 Press any key AFTER the screen comes back on
Press any key to continue . . .
    sending 'devtree' (512 KB)... OKAY [  0.619s]
             writing 'devtree'... OKAY [  0.510s]
  sending 'system' (262144 KB)... OKAY [ 64.767s]
              writing 'system'... OKAY [ 24.441s]
  sending 'system' (262144 KB)... OKAY [ 68.939s]
              writing 'system'... OKAY [ 21.309s]
  sending 'system' (130816 KB)... OKAY [ 34.691s]
              writing 'system'... OKAY [ 10.566s]
      sending 'boot' (8192 KB)... OKAY [  3.204s]
                writing 'boot'... INFOPreflash validation failure
FAILED (remote: )
  sending 'recovery' (9216 KB)... OKAY [  4.316s]
            writing 'recovery'... OKAY [  1.842s]
sending 'preinstall' (262144 KB)... OKAY [ 61.888s]
          writing 'preinstall'... OKAY [ 22.229s]
sending 'preinstall' (262144 KB)... OKAY [ 73.821s]
          writing 'preinstall'... OKAY [ 22.009s]
sending 'preinstall' (98304 KB)... OKAY [ 31.460s]
          writing 'preinstall'... OKAY [  8.380s]
    sending 'radio' (21900 KB)... OKAY [  6.491s]
               writing 'radio'... OKAY [  2.607s]
 It is recommened to wipe data, especially if you were on a custom rom.
 If you don't you will probably bootloop and have to wipe anyway...
 Press any key to Wipe the phone's data (NOT SDCARD(S)) or exit the utility.
Press any key to continue . . .
            erasing 'userdata'... OKAY [  0.743s]
               erasing 'cache'... OKAY [  0.090s]
    sending 'radio' (21900 KB)... OKAY [  6.106s]
               writing 'radio'... OKAY [  1.698s]
     rebooting into bootloader... OKAY [  0.128s]
 You are now on stock 6.16.211. Please boot normally by holding down power.

Please make a selection or hit ENTER to return:'PLEASE HELP  i held down power but still in the same no booting up



#36 jl90

jl90

    \m/

  • Developer
  • 1,642 posts
  • LocationPhoenix, Az.
  • Current Device(s):Nexus 6 64GB, RAZR HD Maxx

Posted 30 September 2013 - 05:23 PM

Dude it looks like you're trying to install ICS... Find the newest utility. :)

#37 Majormer

Majormer

    Call me Big Papa..

  • Validating
  • PipPip
  • 41 posts
  • Twitter:@MajormerWizard
  • LocationKansas City, MO

Posted 02 October 2013 - 09:11 AM

Yeah, I don't think this is on topic for the Low Battery issue.


  • jl90 likes this




2 user(s) are reading this topic

0 members, 2 guests, 0 anonymous users