Jump to content


Photo

Matt's unbrick utillity Help Please

unbrick

Best Answer Memnoch73 , 03 June 2013 - 06:35 AM

I tried to go to ICS from JB on my droid razr (big mistake) and now it is bricked. can someone please tell me what I need to do to fix this? I tried to run a program to unbrick it but I keep getting a preflash validation error. I saw on the thread where someone said you had to make sure to know where you were coming from when you bricked to make sure you use the right link. Can someone please tell me what link I need to use?

 

 Any help would be greatly appreciated. 

 

Thanks!! 

Jess

 

You can use the latest Utility. It's in the post above yours.

Go to the full post


  • Please log in to reply
32 replies to this topic

#21 riggsdaruler

riggsdaruler

    Member

  • Members
  • PipPip
  • 110 posts
  • Twitter:riggsdaruler
  • Google+:riggsdaruler
  • LocationGeorgia

Posted 17 March 2013 - 09:32 AM

Did you try and reapply the OTA from Recovery after flashing?

Yes you can try Matts JB Utility which has the fastboot files. See here:

Please Login or Register to see this Hidden Content




#22 thecarlsoncrew

thecarlsoncrew

    n00b

  • Members
  • Pip
  • 2 posts

Posted 17 March 2013 - 05:20 PM

Hello! My Maxx was in the state where I was getting an Encryption Unsuccessful error loop, also courtesy of Razr Bootstrapper.

I had read not to try SBF'ing back to ICS, so I never did that. I ran the JB unbrick utility, booted into recovery manually and did the cache wipe and factory reset. Without leaving recovery, I tried to install the .211 zip file (I had previously installed it manually from my sdcard and it worked perfectly, so I know it's a valid installation file), but I got an aborted installation due to an error that I can't quite remember now. I don't believe it was a signature verification error or the status 7 error...I think it was some sort of package check that failed.

Anyway, now I can't even boot into recovery. All I have is a plain black screen. If I hold the volume up/down buttons and the power button, it flickers once as if it's turning off, then I see the "M" logo for a few seconds, then back to black. If I run the unbrick utility again, it just sits there waiting for the device. How can I get back into the recovery menu?


***UPDATE***
Many thanks go out to spazmeister & Co. in the chat room tonight for getting me back up and running again. You guys are awesome (whether British or not)!
  • spazmeister likes this

#23 lballew9952

lballew9952

    n00b

  • Members
  • Pip
  • 1 posts
  • Current Device(s):razr maxx

Posted 29 May 2013 - 09:02 AM

My phone will not go into recovery and Fastboot is all i can get in to I have ran just about all the utilities and they fail, preflash validation failure errors, Where can I find the unbrick utility at??



#24 johnthehillbilly

johnthehillbilly

    Gear jammin' S-Mod

  • Smod
  • 6,470 posts
  • Twitter:@johnhillbilly
  • Google+:http://goo.gl/ColUJ .. johnthehillbilly@gmail.com
  • LocationSomewhere between here, and there...
  • Current Device(s):unlocked RAZR HD (xt926)... RAZR (xt912)

Posted 29 May 2013 - 10:15 AM

My phone will not go into recovery and Fastboot is all i can get in to I have ran just about all the utilities and they fail, preflash validation failure errors, Where can I find the unbrick utility at??


What does it say on the fastboot screen .... it should give a general reason for only being able to get into fastboot.....

Here is the latest xt912 utility if you need it

Please Login or Register to see this Hidden Content

RAZR Utility XT912 Jellybean -- Windows + Mac + Linux (All In One!)#entry227369

tapadriving.....hillbilly style

Feeding my android addiction......... one phone at a time.....

jhf.png

If you are feeling generous and would like to buy me a drink.... coffee :)


#25 jess_2903

jess_2903

    n00b

  • Members
  • Pip
  • 2 posts

Posted 03 June 2013 - 06:29 AM

I tried to go to ICS from JB on my droid razr (big mistake) and now it is bricked. can someone please tell me what I need to do to fix this? I tried to run a program to unbrick it but I keep getting a preflash validation error. I saw on the thread where someone said you had to make sure to know where you were coming from when you bricked to make sure you use the right link. Can someone please tell me what link I need to use?

 

 Any help would be greatly appreciated. 

 

Thanks!! 

Jess



#26 Memnoch73

Memnoch73

    ~The Devil~

  • Smod
  • 5,016 posts
  • Google+:memnoch73@gmail.com
  • LocationRochester, NY
  • Current Device(s):Pixel 3XL

Posted 03 June 2013 - 06:35 AM   Best Answer

I tried to go to ICS from JB on my droid razr (big mistake) and now it is bricked. can someone please tell me what I need to do to fix this? I tried to run a program to unbrick it but I keep getting a preflash validation error. I saw on the thread where someone said you had to make sure to know where you were coming from when you bricked to make sure you use the right link. Can someone please tell me what link I need to use?

 

 Any help would be greatly appreciated. 

 

Thanks!! 

Jess

 

You can use the latest Utility. It's in the post above yours.


  • jess_2903 likes this

Bluesig3_zpsfd248ca4.png

 


#27 johnthehillbilly

johnthehillbilly

    Gear jammin' S-Mod

  • Smod
  • 6,470 posts
  • Twitter:@johnhillbilly
  • Google+:http://goo.gl/ColUJ .. johnthehillbilly@gmail.com
  • LocationSomewhere between here, and there...
  • Current Device(s):unlocked RAZR HD (xt926)... RAZR (xt912)

Posted 03 June 2013 - 06:37 AM

If you follow the link in the post directly above your post.... it will take you to the latest utility..... run option 1 and it will wipe and reinstall JB :)


Hmmmm ninj'd by memnoch again LOL :)
  • Memnoch73 and jess_2903 like this

Feeding my android addiction......... one phone at a time.....

jhf.png

If you are feeling generous and would like to buy me a drink.... coffee :)


#28 jcs78

jcs78

    n00b

  • Members
  • Pip
  • 13 posts

Posted 03 June 2013 - 07:00 AM

Hello! My Maxx was in the state where I was getting an Encryption Unsuccessful error loop, also courtesy of Razr Bootstrapper.

I had read not to try SBF'ing back to ICS, so I never did that. I ran the JB unbrick utility, booted into recovery manually and did the cache wipe and factory reset. Without leaving recovery, I tried to install the .211 zip file (I had previously installed it manually from my sdcard and it worked perfectly, so I know it's a valid installation file), but I got an aborted installation due to an error that I can't quite remember now. I don't believe it was a signature verification error or the status 7 error...I think it was some sort of package check that failed.

Anyway, now I can't even boot into recovery. All I have is a plain black screen. If I hold the volume up/down buttons and the power button, it flickers once as if it's turning off, then I see the "M" logo for a few seconds, then back to black. If I run the unbrick utility again, it just sits there waiting for the device. How can I get back into the recovery menu?


***UPDATE***
Many thanks go out to spazmeister & Co. in the chat room tonight for getting me back up and running again. You guys are awesome (whether British or not)!

so what did you end up doing to fix the issue you were having

#29 jess_2903

jess_2903

    n00b

  • Members
  • Pip
  • 2 posts

Posted 03 June 2013 - 06:26 PM

Thank you so much!! I was beginning to think I would never get it fixed! It is now up and running!! =)

 

Thanks

Jess


  • johnthehillbilly likes this

#30 Memnoch73

Memnoch73

    ~The Devil~

  • Smod
  • 5,016 posts
  • Google+:memnoch73@gmail.com
  • LocationRochester, NY
  • Current Device(s):Pixel 3XL

Posted 03 June 2013 - 06:29 PM

Thank you so much!! I was beginning to think I would never get it fixed! It is now up and running!! =)

 

Thanks

Jess

 

Glad to hear it.  :)


  • johnthehillbilly likes this

Bluesig3_zpsfd248ca4.png

 


#31 thecarlsoncrew

thecarlsoncrew

    n00b

  • Members
  • Pip
  • 2 posts

Posted 06 June 2013 - 08:08 PM

so what did you end up doing to fix the issue you were having

 

Wow, that was a long time ago...!

 

If I recall correctly, I think I was simply not getting the timing right in pressing the physical buttons to get back into the recovery.  I was doing it right, just not getting them all pressed properly in sync.  Once they pointed that out, I kept trying until I got it, and then all was well.  Not sure how much help that is, but I believe that's what got me going again.



#32 billouteast

billouteast

    n00b

  • Members
  • Pip
  • 1 posts

Posted 09 January 2014 - 01:27 AM

Hi Droid fans and helpers.

 

I am also in an encryption unsuccessfull loop and have tried several options to get it out.

 

Installed RSDLite and tried to install several different roms, it comes back with failed at step 6/22 .

 

I managed to get into the boot menu and tried to "install upgrade from SD Card" several JB roms but they all failed at package validation errors.

 

it is an xt910 running on optus australia, i think it's gsm.

 

any help greatly appreciated, thanks

 

Bill



#33 jocimycin

jocimycin

    n00b

  • Members
  • Pip
  • 1 posts
  • Twitter:@joceemycin
  • LocationNigeria
  • Current Device(s):Droid razr Maxx

Posted 21 October 2015 - 08:52 PM

i had my xt912 droid razr stuck on encrption unsuccessful and after reading series of tutorials and manuals on how to get it fixed (None worked) i came across matts droid razr utility xt912 and just followed its instructions and voila!! am back to life


  • RikRong likes this





Also tagged with one or more of these keywords: unbrick

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users