38 replies to this topic

[BytecodeMe]

Using a program that wipes the partitions of other phones isn't a good idea... the partition tables for every phone are different and what could have been the system and boot partitions for the G1 could be the bootloader and recovery partitions for the HD. Since there is absolutely no response from the phone whatsoever I would say its a bootloader brick, I've only had that when I deleted the bootloader on my dads S2.

 

EDIT: 2K posts! 

[brandon71]

This is the general stuff of a jtag it can do different things

Please Login or Register to see this Hidden Content

Sent from my XT907 using Tapatalk 2

[kaleem_qadir]

qhsusb_dload_Drivers insttaled successfully and now rsd lite detects my phone but for installation fast boot required.... now any thing possible?  

[shane1]

if you can get into fastboot somehow. if the button combo doesnt work you can try getting there through adb

[kaleem_qadir]

thanx man for quick reply. plz tell me how can get it through adb

[shane1]

in command prompt and type      adb devices      if it sees your phone a serial # will show up then type    adb reboot bootloader

[shane1]

you can open a command promt with the utility folder on your desktop by holding right click and shift then selecting open command prompt here

[Someolddude]

I would consider at this point trying anything that doesn't require fastboot to install. Perhaps a recovery system if possible.

[kaleem_qadir]

bad luck device not found

[kaleem_qadir]

can can get recovery ? 

[shane1]

without adb or fastboot its hopeless i think sorry man, if you see anything online that you think might work i suggest try it cause your phone cant get any worse than it is.

[kaleem_qadir]

in rsd lite device is connected but here device not found

[shane1]

rsd may see your phone, but everything on the phone has been deleted. your bootloader,rocovery, system everything. the phone needs to be in fastboot in order to flash anything and its not there

[bigv5150]

Basically you have a paper weight the only thing that could fix this I believe at this point

is Motorola.

[brandon71]

I think qualcomm itself would have to fix it because he's stuck in the qualcomm bootloader

Sent from my XT907 using Tapatalk 2

[kaleem_qadir]

how can use qualcomm? now when connect to pc it LED green lite blinks? any idea it can be restored?

[jco23]

how can use qualcomm? now when connect to pc it LED green lite blinks? any idea it can be restored?

green LED light is a good sign - I have had this before and have read of others with this as well.

 

green LED light means that the phone is fully charged and something is working (meaning that it has the right signals to tell the LED to light up upon full charge).

 

see now if you can get into recovery - you might have to do it blindly (I have done this before and got it to work).  basically, you would press all 3 buttons, release just the power after about 5 seconds, then release the other 2 buttons after about 2 seconds.  wait another 2 seconds, then press the volume down once, then the volume up button - this should get you into your custom recovery.

 

hope this helps.

 

otherwise, try again with the droid razr utility.

[kaleem_qadir]

thanx man but now my mob in repair shop to repair bootloader... hope it will repaired

[Someolddude]

Keep us posted on how the shop makes out. Wondering how this turns out. Another option might be to get a used unit from eBay or wherever. Might find one already unlocked and rooted.