30 replies to this topic

[asgaard]

Hi all

 

I'm newbie on this forum and not too sure is it a right place for it. I've got huge problem with my Moto. I've already posted it on xda, but as far as now nobody came back with any solution, so i'll try to give it go here.

 

Bought a Motorola phone as it is (no water damage) which comes to booting logo and after few minutes keep restarting and trying to booting with no results. I've started red some posts, already but i'm stuck. Reset doesn't work (Power button+volume control down), but when i press power button +camera button and plug in with computer, it shows black screen and green led. Already installed MEDFIELD drivers, RSD Lite and xFSTK-DLDR. tried already RSD Lite with no luck (i've downloaded CFC_signed_customer_8.7.1I-110_IFW-DE-31_RTEU.xml and CFC_9.8.2I-50_SMI-26_S7_USASMIJBRTEU.xml)

 

Can get to AP Fastboot Flash Mode, but when i tried to do Factory or Recovery gets:

Failed to enter Factory/Recovery mode. error code -18

 

No more error code, only some kind of "GETVAR" failed

 

I've removed all drivers and programs for Motorola and install RSD Lite 6.1.5 and Motorola Device Manager+USB drivers and my Motorola is seen in device manager as ADB Interface (Mot Single ADB Interface) and when i've started RSD and firmware CFC_9.8.2I-50_SMI-29_S7_USASMIJBRTGB.xml got such a message (picture number 7) and it stuck on Restarting Droidboot (Motorola) and restarting after minute and goes back to AP Fastboot.

Any help will be greatly appreciated

 

Attached Files

•  7.jpg   166.99KB   15 downloads
•  3.jpg   126.64KB   16 downloads
•  4.jpg   118.42KB   17 downloads
•  5.jpg   115.95KB   16 downloads
•  6.JPG   56.01KB   15 downloads
•  2.jpg   122.15KB   14 downloads

[SamuriHL]

The fact that you've just randomly started flashing FXZ's without knowing what you're flashing means there's not much I can do for you.  You need to find the appropriate, latest version, FXZ for your phone and flash it.  

[asgaard]

I bought that phone as faulty software issue. Normally it will stuck on M logo, but if i press Power and Volume down button it goes to AP Fastboot, also i don't know to much about android software, how to unbricked ot whatsoever

[SamuriHL]

That's great and all, but, if you flash the wrong FXZ, you brick it as you've already discovered with the errors in your pictures.  You need to find the LATEST FXZ for your phone and flash it.  If it doesn't fix it, then there's not a lot that can be done.

[asgaard]

That's great and all, but, if you flash the wrong FXZ, you brick it as you've already discovered with the errors in your pictures.  You need to find the LATEST FXZ for your phone and flash it.  If it doesn't fix it, then there's not a lot that can be done.

Could U tell me what FXZ means and where I have to looking for it?

[livinginkaos]

FXZ is what the firmware you flash in rsd is called. You need to find the appropriate one for your device, location and latest system version. You should be able to locate it on this page -

Please Login or Register to see this Hidden Content

Sent from my S-Offed One M8

[asgaard]

FXZ is what the firmware you flash in rsd is called. You need to find the appropriate one for your device, location and latest system version. You should be able to locate it on this page -

Please Login or Register to see this Hidden Content

Sent from my S-Offed One M8

I've downloaded few of them (Retail Europe), but can't install them through AP Fastbook as it seems like Getvar blocked it.

Attached Files

•  6.JPG   56.01KB   11 downloads

[SamuriHL]

Download and install (READ FULLY BEFORE INSTALLING): 

Please Login or Register to see this Hidden Content

 

use this FXZ that you already downloaded:  CFC_9.8.2I-50_SMI-26_S7_USASMIJBRTEU.xml

 

Extract this file into the FXZ_xt890 folder:

Please Login or Register to see this Hidden Content

 

Run the HouseOfMoto.bat file, choose fastboot flash mode.  Follow the instructions.

[livinginkaos]

Nvm

[asgaard]

Download and install (READ FULLY BEFORE INSTALLING): 

Please Login or Register to see this Hidden Content

 

use this FXZ that you already downloaded:  CFC_9.8.2I-50_SMI-26_S7_USASMIJBRTEU.xml

 

Extract this file into the FXZ_xt890 folder:

Please Login or Register to see this Hidden Content

 

Run the HouseOfMoto.bat file, choose fastboot flash mode.  Follow the instructions.

Should i uninstall Motorola Device Manager (as i've installed before) with USB drivers and go for which You linked in Your post or kept that one which already have installed?

[SamuriHL]

Install the latest.

[asgaard]

Install the latest.

Ok. will do, and keep U posted. Thanks for that

 

Btw. As far as i understand i have to copy all files from CFC_9.8.2I-50_SMI-26_S7_USASMIJBRTEU.xml

into FXZ_xt926 folder, but it won't be .img file as there aren't any .img files. Is that correct?

[asgaard]

Ok. will do, and keep U posted. Thanks for that

 

Btw. As far as i understand i have to copy all files from CFC_9.8.2I-50_SMI-26_S7_USASMIJBRTEU.xml

into FXZ_xt926 folder, but it won't be .img file as there aren't any .img files. Is that correct?

When i starting HouseOfMoto-ScriptGenerator it didn't show me any files (no .img)?

 

[SamuriHL]

You need to extract the ENTIRE FXZ into the FXZ_xt890 directory.  The instructions on this are very clear.

[asgaard]

You need to extract the ENTIRE FXZ into the FXZ_xt890 directory.  The instructions on this are very clear.

Still don' know how to do it, i mean how to change it in .img . Can You show me step by step how to?

 

Only such a files comes in that folder. (pict. 8)

Attached Files

•  8.jpg   20.2KB   13 downloads

[SamuriHL]

I don't do "step by step" when I've laid it out very clearly.  We're talking about taking a zip file and unzipping the contents of it into a folder.  If that is not something you are capable of doing, well, this process is probably not going to go well.  I know that sounds harsh, but, the simple reality is that basic computer skills ARE required in order to flash phones.

[asgaard]

I don't do "step by step" when I've laid it out very clearly.  We're talking about taking a zip file and unzipping the contents of it into a folder.  If that is not something you are capable of doing, well, this process is probably not going to go well.  I know that sounds harsh, but, the simple reality is that basic computer skills ARE required in order to flash phones.

Ok. will get back to You later on with any progress. Thanks

[asgaard]

I've done it follow Your post, but in HouseOfMoto says that didn't find file (RSD or Fastboot). I've sent You House.txt file:

 

POST THE CONTENTS OF THIS FILE IN THE HoM THREAD
 
FASTBOOT DEVICES:
 
FILE STRUCTURE:
 Wolumin w stacji C to WIN7
 Numer seryjny woluminu: BB5A-E2E9

 Katalog: C:\HouseOfMoto

2014-05-22  22:59    <DIR>          .
2014-05-22  22:59    <DIR>          ..
2014-05-22  22:23               281 CreateLOG.bat
2014-05-22  22:57                 4 flashmode.ini
2014-05-22  22:50               975 FXZ_xt
2014-05-22  22:50    <DIR>          FXZ_xt####
2014-05-22  22:59                95 house.log
2014-05-22  22:23            13˙094 HouseOfMoto-ScriptGenerator.jar
2014-05-22  22:23             4˙855 HouseOfMoto.bat
2014-05-22  22:23             2˙877 HouseOfMoto.sh
2014-05-22  22:54                 7 phone.ini
2013-11-23  18:07    <DIR>          root
2014-05-22  22:24    <DIR>          rsd
               8 plik(˘w)             22˙188 bajt˘w

 Katalog: C:\HouseOfMoto\FXZ_xt####

2014-05-22  22:50    <DIR>          .
2014-05-22  22:50    <DIR>          ..
2014-05-22  22:43        11˙534˙336 boot_signed
2014-05-22  22:43         8˙160˙652 bos_signed
2014-05-22  22:43        54˙536˙192 cdrom_signed
2014-05-22  22:43             1˙462 CFC_9.8.2I-50_SMI-26_S7_USASMIJBRTEU.xml
2014-05-22  22:43            66˙528 dnx
2014-05-22  22:50               393 FULL_xt890.bat
2014-05-22  22:50               354 FULL_xt890.sh
2014-05-22  22:43            32˙768 gpt_signed
2014-05-22  22:43         1˙937˙660 ifwi
2014-05-22  22:50               366 KEEP-DATA_xt890.bat
2014-05-22  22:50               329 KEEP-DATA_xt890.sh
2014-05-22  22:43           875˙336 logo_signed
2014-05-22  22:43        23˙832˙048 motoboot
2014-05-22  22:43        17˙501˙930 motobp
2014-05-22  22:43        11˙534˙336 recovery_signed
2014-05-22  22:44       825˙135˙784 system_signed
2014-05-22  22:44           875˙336 ulogo_signed
              17 plik(˘w)        956˙025˙810 bajt˘w

 Katalog: C:\HouseOfMoto\root

2013-11-23  18:07    <DIR>          .
2013-11-23  18:07    <DIR>          ..
               0 plik(˘w)                  0 bajt˘w

 Katalog: C:\HouseOfMoto\rsd

2014-05-22  22:24    <DIR>          .
2014-05-22  22:24    <DIR>          ..
2014-05-22  22:23           421˙978 BlankFlash.dll
2014-05-22  22:23             1˙106 cleancache.vbs
2014-05-22  22:23            86˙116 CommonXMLParser.dll
2014-05-22  22:23            49˙236 FBFlash.dll
2014-05-22  22:23            41˙054 FlashAdapter.dll
2014-05-22  22:23           172˙032 LCDriver_CNH1606432.dll
2014-05-22  22:23            69˙632 LCM.dll
2014-05-22  22:23            59˙856 libusb0.dll
2014-05-22  22:23         1˙159˙259 pst.dll
2014-05-22  22:23            26˙177 PST.ini
2014-05-22  22:23            23˙431 pst_flash.ini
2014-05-22  22:23         1˙630˙298 pst_fp_flash.dll
2014-05-22  22:23           172˙131 pst_fp_flashdevapi.dll
2014-05-22  22:23            45˙568 PST_INI.xls
2014-05-22  22:23         2˙292˙736 QtCore4.dll
2014-05-22  22:23             1˙504 RSDLite.ini
2014-05-22  22:24            53˙323 rsd_service.dll
2014-05-22  22:24               225 rsd_service.ini
2014-05-22  22:24             1˙973 sdk_common.ini
2014-05-22  22:24         2˙789˙448 SDL.exe
2014-05-22  22:24           397˙824 xfstk-dldr-api.dll
              21 plik(˘w)          9˙494˙907 bajt˘w

     Razem wymienionych plik˘w:
              46 plik(˘w)        965˙542˙905 bajt˘w
              11 katalog(˘w)   1˙899˙724˙800 bajt˘w wolnych
 

 

[SamuriHL]

Uh, yea.  That's because FXZ_xt#### is not a literal.  You replace #### with the model of your phone.  Which is also what the instructions say to do.

[asgaard]

I've using HouseofMoto 2.3 and as per pictures it seems that something happens, but still no working. When i've tried using FASTBOOT  it can't find file path and when i starting RSD it goes to RSD program nad stops on 3/10 and Restarting Droidboot on phone. What's wrong with it?

Attached Files

•  9.jpg   19.11KB   32 downloads
•  10.jpg   17.59KB   40 downloads
•  11.jpg   21.43KB   33 downloads
•  12.jpg   20.24KB   25 downloads
•  13.jpg   29.65KB   22 downloads
•  14.JPG   232.26KB   17 downloads