15 replies to this topic

[django]

Need Help Bricked Razr

I actually used the CWM Touch to delete EVERYTHING from my XT912. I can get to android recovery and I can use AP fastboot, but RSD and Matts Utility wont recognize my phone on AP Fastboot. RSD will recognize phone on BP SPF Fastboot. If i try and flash then it says "failed switching to AP Fastboot"
Thanks For anyhelp. ive been stuck for days. i have the battery issue solved i think i just need rsd to recognize in ap fastboot and id be ok but i dunno??
david

[Thach]

I have informed a couple people of your issue and they should be contacting you soon to help you out.

Sent from my DROID RAZR using Tapatalk 2

[VantenKiest]

ok step one power off the phone unplugged. i need you to hold all 3 buttons till you see a white menu. use vol down to highlight the selection and press vol up to select. select ap fastboot mode if it errors i need to know what it says. make sure you have the utility ready 1,6 for ginger bread 1.8 for ics

[Emie]

My phone is doing the exact same thing as Django. I booted into ap fastboot and it says

Device is locked. STATUS CODE:0
BATTERY OK
ONNECT TO USB
DATA CABLE


If you can get me out of this, my donations will be very merry this year!

[JungleKing76]

My phone is doing the exact same thing as Django. I booted into ap fastboot and it says

Device is locked. STATUS CODE:0
BATTERY OK
ONNECT TO USB
DATA CABLE


If you can get me out of this, my donations will be very merry this year!

This is exactly what your phone should say. If you are trying to fix something connect it to computer and run matt's RAZR utility.

Sent from my DROID RAZR using Xparent Purple Tapatalk 2

[jrbxx7]

Yep make sure ur in ap fastboot and have current moto drivers installed and restore to stock with utility 1.82 I believe Is the most current

SeNt FrOm .......OvErFlAsHeD SPYDER Xt912

[VantenKiest]

My phone is doing the exact same thing as Django. I booted into ap fastboot and it says

Device is locked. STATUS CODE:0
BATTERY OK
ONNECT TO USB
DATA CABLE


If you can get me out of this, my donations will be very merry this year!

ok if you were on Ginger bread use utility 1.6 and extract it to a folder on your desktop then connect via usb install drivers and then fastboot.

if you were on ICS use utility 1.82 and follow the same thing.

if you need help we are all here for you

[Shacker]

Please pardon me if I should be posted in a different thread.

I too bricked my RAZR. I was on the .215 leak and tried to go back to .211 (returning the phone to Verizon). I'm not sure what happened but now I can't get into recovery mode. The device loops past the M, the dead Android and then shuts down. I've tried the 1.7 utility which is what I was using when things went kaka. DriodRazrUtility is now balking at the battery, so I'll charge overnight, try 1.82 in the morning and report back. Any advice is appreciated.

[Shacker]

1.82 is exactly what you need. Make sure you have all of the drivers installed that come with it as well. Option 1 will get you back to stock 211. Although if it is bootlooping, it will probably not take a charge. You will likely need a factory cable at this point.

Success. 1.82 option 1 plus the updated drivers did the trick. I risked trying it when the phone charge (factory cable) reached 50%. Back from dead.

[bjw1979]

Trying to find Matt's Razr Utility so I can unbrick mine, going to search but can someone please post a quick link to the utility. Thanks, - B

[210droid]

my prblem seems alot worse than the others
was using droid hd room, wanted to go back to safeside to wait for jelly bean; i put it on safeside but i forgot to wipe date/cache/ before restoring factory backup.
now razor is off. when powered on.. just says moto dual core logo and then turns off again. when trying to go into fastb oot mode; it only blinks once-flashing a white line across top of screen. AND pretty sure my battery was around 20% earlier.
any help is greatly appreciated!
richardhll210@gmail.com

[koreanschoolkid]

Edit: Fixed by dint of sheer stubbornness and lots of reading and abit of "why the hell not, let's try it".
Thank you Rhetoric for keeping me in the game. Now I go to try to reinstall Eclipse 1.3 and probably end up bootlooping again.

Edited by koreanschoolkid, 26 December 2012 - 02:04 AM.

[johnthehillbilly]

my prblem seems alot worse than the others
was using droid hd room, wanted to go back to safeside to wait for jelly bean; i put it on safeside but i forgot to wipe date/cache/ before restoring factory backup.
now razor is off. when powered on.. just says moto dual core logo and then turns off again. when trying to go into fastb oot mode; it only blinks once-flashing a white line across top of screen. AND pretty sure my battery was around 20% earlier.
any help is greatly appreciated!
richardhll210@gmail.com

first question.... probably the most important for right now.... will it take a charge when powered off?