53 replies to this topic

[phrir1]

Post 367 on page 37

[DROIDMONSTER]

I have to ask, why does everyone want to overclock so bad for lol?

Especially if you're on the OG RAZR.

Why do people climb to the top of a mountain? to prove they can!!!!!!!!!!!!!!!!!!!!!!!!!!

[razzrmaxx]

I have to ask, why does everyone want to overclock so bad for lol?

Especially if you're on the OG RAZR.

It's the Adrenaline

Sent from my DROID RAZR HD

[wallacengineering]

Post 367 on page 37

I have it now but have no idea how to overclock here...
There is no int.d under system/ect to load an overclocking script to

Basically I have the modules extracted and copied to system/lib/modules and thats it.
What is my next step to overclocking? When I go into setCPU it just shows my stock 1200MHz max value...

This is for the official JB OTA Update (.16), right?

[ZKK007]

You have to set it up with init.d scripts like you normally had to do. Read post 1/2 on that thread for the scripts, but it will be basically the same as the modules script Aviator had

[wallacengineering]

You have to set it up with init.d scripts like you normally had to do. Read post 1/2 on that thread for the scripts, but it will be basically the same as the modules script Aviator had

cool, thanks ZK

[wallacengineering]

You have to set it up with init.d scripts like you normally had to do. Read post 1/2 on that thread for the scripts, but it will be basically the same as the modules script Aviator had

Witch thread are you referring to? I tried to push OC modules using the older Aviator 2.0.1 utility from before but less than 1/2 of the files actually made it through. Im gonna have to delete the ROM slot and re-install because it is now unstable after attempting to push the OC scripts to an OFFICIAL JB ROM (.16 Kernel)

[ZKK007]

Witch thread are you referring to? I tried to push OC modules using the older Aviator 2.0.1 utility from before but less than 1/2 of the files actually made it through. Im gonna have to delete the ROM slot and re-install because it is now unstable after attempting to push the OC scripts to an OFFICIAL JB ROM (.16 Kernel)

The modules need to be placed in system/lib/modules, and then you need an init.d script to load them like in post 1/2 of wirleyes thread. I've been playing around a little, but I can't seem to get the modules to load with the init.d script.

Let me know how you get on!

[garywojdan81]

The modules need to be placed in system/lib/modules, and then you need an init.d script to load them like in post 1/2 of wirleyes thread. I've been playing around a little, but I can't seem to get the modules to load with the init.d script.

Let me know how you get on!

Here are the new modules:

Please Login or Register to see this Hidden Content

You have to extract them & push them to system/lib/modules & have an init.d script to load them at boot. The old init.d script seems to work however.

Sent from my XT912 using Tapatalk 2

[iamhugger]

i flashed modules and init.d script and all is well, oh, had to write new overclock file for init.d since not included, i have rebooted many times and all is well.. Thanks Again for recompiling these..



Sent from my DROID RAZR using Tapatalk 2

[garywojdan81]

i flashed modules and init.d script and all is well, oh, had to write new overclock file for init.d since not included, i have rebooted many times and all is well.. Thanks Again for recompiling these..



Sent from my DROID RAZR using Tapatalk 2

All the thanks goes to dtrail1. All I did was subscribe to the thread

Sent from my XT912 using Tapatalk 2

[ZKK007]

All the thanks goes to dtrail1. All I did was subscribe to the thread

Sent from my XT912 using Tapatalk 2

i flashed modules and init.d script and all is well, oh, had to write new overclock file for init.d since not included, i have rebooted many times and all is well.. Thanks Again for recompiling these..



Sent from my DROID RAZR using Tapatalk 2

Did you guys have to use setCPU to get it to stick? I tried cpu control but after a few minutes of screen off it reverts to minimum values. Set CPU seems to be holding.

[garywojdan81]

Did you guys have to use setCPU to get it to stick? I tried cpu control but after a few minutes of screen off it reverts to minimum values. Set CPU seems to be holding.

So far they seem to stick. But I manually pushed the modules to system/lib/modules & just modified the loading script I was using for ICS.

Sent from my XT912 using Tapatalk 2

[iamhugger]

don't they just stick because of the file in init.d for overclocking? uh hah.. i use nofrills.

Sent from my DROID RAZR using Tapatalk 2