53 replies to this topic

[phrir1]

I am not sure who may want to know or not, but i just wanted to throw this out there.

Just for kicks and giggles I tried the current OC modules that we already have for ICS. All the modules, schedulers, and govenors that i have tried have worked so far.

hotplugX has issues

Currently Overclocked to 1350, and trying different govenors, and schedulers.

Link to modules

Please Login or Register to see this Hidden Content

EDIT: So after some more tinkering i have found an issue. I am just playing with slot 4. Which is the max MHz. and using set cpu.
Once you set your value in slot 4 it does work, but if you lock your screen and then unlock the Max drops back down to default 1200mhz until you slide and adjust the max again and then it will go back to the value that you set previously.

EDIT #2: Thanks to user Razzrmaxx we have a temp work around that helps stick the Clock

one down fall you have to use SetCPU which is a paid app.

So lets get to it

1. Once you have the modules installed and you actually overclock go into SetCPU
2. go into the profiles section and enable profiles
3. add a new profile for screen on
4. set your max and min cpu speeds
5. make sure you check the box for persistent
(option: set cpu govenor also if you want)
6. set priority
7. save and make sure it is checked

after this is done you can just exit out and everytime your screen comes on SetCPU will make sure the clock is in place.

PROFIT!!

Please Login or Register to see this Hidden Content

 

Please Login or Register to see this Hidden Content

  51.98KB   366 downloads

Please Login or Register to see this Hidden Content

 

Please Login or Register to see this Hidden Content

  76.16KB   368 downloads

Please Login or Register to see this Hidden Content

 

Please Login or Register to see this Hidden Content

  51.11KB   366 downloads

[Kyle06]

Well I can get the governors to load but no luck with overclocking yet..... what did you do to get that working?

[phrir1]

I did it two different ways to see if I could get it to stick. The easy way to do it is just use the app that's in the thread I linked to in OP. or you can manually place the modules in /system/lib/modules and set permissions. Then open a terminal and manually insmod/echo commands as referenced in that thread as well.

[dtomlin]

I imagine we need new modules for jb, although it seems it should work on the 3.0.8 kernel. Would be nice for us og RAZR users to under volt a little.

[tucstwo]

What was done in the past was using an init.d script to set the clockspeed at boot. Otherwise they reset.

[dtomlin]

Yeah that's what I'm trying. But for some reason after screen off, it won't scale back to any speed that isn't stock. I used the same modules and script that worked in ICS.

[tucstwo]

Yeah that's what I'm trying. But for some reason after screen off, it won't scale back to any speed that isn't stock. I used the same modules and script that worked in ICS.

well, I guess it may be safe to say, It DONT work in JB? lol?

[phrir1]

Yup, the modules were written on our ICS kernel and some of the governors do work, some have issues with deep sleep. Being that the jb kernel is close they kinda work, but need to be redone.

[dtomlin]

Okay it looks like the way init d works is a little different on jb than ics. I couldn't get Matt's installer to work so I tried an old zip I had from ics. Now I can't test Matt's cause my data cable died, and I'm waiting on a new one. At least I hope its the cable. Phone will charge, but it won't connect to any of my computers.

[dtomlin]

Or maybe not. About to give up on this until a final ota is released.

[jto101680]

Hey guys. I uninstalled set CPU. Went to the market and downloaded motomizer. Then installed the one touch optimizer. Reboot, go to tools download and install kernel modules. Then change your CPU. I use the highest preset then up the maximum to 1350. Change gov to pegasus. IO to sio. Then I change the upload/ download to +2. Reboot. Works like a charm on every ROM I have ever had. JB or ICS. I put a comment about this in the app section but no one seamed to care

Sent from my DROID RAZR using Tapatalk 2

[phrir1]

After you lock the Screen then unlock can you go into setcpu and verify the max is still at 1350

[jto101680]

Nope. Damn it! Now I see the issue. Sorry for wasting your time:angry:

Sent from my DROID RAZR using Tapatalk 2

[razzrmaxx]

So which governors are working and sticking please?

[razzrmaxx]

So which governors are working and sticking please?

[garywojdan81]

So which governors are working and sticking please?

For me, the best options have been pegasusq & sio but it's a crap shoot on whether they stick or not, unless you're using init.d scripts. The only one I've heard of issues with is hotplugx.

Sent from my DROID RAZR using Tapatalk 2

[ZKK007]

For me, the best options have been pegasusq & sio but it's a crap shoot on whether they stick or not, unless you're using init.d scripts. The only one I've heard of issues with is hotplugx.

Sent from my DROID RAZR using Tapatalk 2

I have had black screen issues with PegasusQ too. I just use hotplug. It give great battery life with comparable performance.

[razzrmaxx]

Can someone please show me the way to the init.script page? Pleeease. Thank you

[ZKK007]

Can someone please show me the way to the init.script page? Pleeease. Thank you

Are you looking for the one in the OP?

Please Login or Register to see this Hidden Content

[razzrmaxx]

Are you looking for the one in the OP?

Please Login or Register to see this Hidden Content

no those wont stick i understood... the ons you use with script manager