Kboss804's .84 Restore From Brick
#181
Posted 16 May 2012 - 08:09 AM
#182
Posted 16 May 2012 - 11:37 AM
path was...ota .173 to .181, ran root and then headed to ics
#183
Posted 16 May 2012 - 12:20 PM
You're supposed to get errors. Especially at that part. Continue past it
#184
Posted 16 May 2012 - 06:49 PM
I was on an .84 build..ended up bricking myself, i've followed the guide 3 times, wiped my sd card... I get error 7 on both /system and cdt.bin
path was...ota .173 to .181, ran root and then headed to ics
Are you Matt's utility to try to get back to pseudo .181? RSD won't work.
#185
Posted 16 May 2012 - 07:30 PM
#186
Posted 20 May 2012 - 02:27 PM
Phone - XT912 Verizon
Boot loader -0A.6C
Used Driod RAZR ICS installer v1.0 and went back to a clean install of 173, then accepted the 181 update adn then installed ICS. After a few days of clean operation, i decided to try a Theme for ICS but after the flash the phone app, contacts app and several other apps starting to stop working so I tried to reverse the flash but my problems did not go away. I then did a factory wipe with no change so i decided to flash the ROM again and of course i bricked it. I have tried everything but so far i have been unable to unbrick. I downloaded "VRZ_XT912_6.5.1-167_DHD-14_M3-8_CFC_1FF_01.xml" and modified the Droid RAZR 1.51 and ran it with option 1 and i get INFOPreflash validation failure for cdt.bin, devtree, boot, and recovery. I was hoping that this were the expected errors from the fastboot compatibility. I then copied "Blur_Version.6.12.181.XT912.Verizon.en.US" to the SD card and tried to updated from Recovery but i recieved an error code 7 when it attempted to verify the system.
What did i do wrong?
#187
Posted 20 May 2012 - 03:17 PM
I have followed the instructions and im still bircked. This my first post here so i will give all the details:
Phone - XT912 Verizon
Boot loader -0A.6C
Used Driod RAZR ICS installer v1.0 and went back to a clean install of 173, then accepted the 181 update adn then installed ICS. After a few days of clean operation, i decided to try a Theme for ICS but after the flash the phone app, contacts app and several other apps starting to stop working so I tried to reverse the flash but my problems did not go away. I then did a factory wipe with no change so i decided to flash the ROM again and of course i bricked it. I have tried everything but so far i have been unable to unbrick. I downloaded "VRZ_XT912_6.5.1-167_DHD-14_M3-8_CFC_1FF_01.xml" and modified the Droid RAZR 1.51 and ran it with option 1 and i get INFOPreflash validation failure for cdt.bin, devtree, boot, and recovery. I was hoping that this were the expected errors from the fastboot compatibility. I then copied "Blur_Version.6.12.181.XT912.Verizon.en.US" to the SD card and tried to updated from Recovery but i recieved an error code 7 when it attempted to verify the system.
What did i do wrong?
Based on what you wrote it sounds like you did everything right. The errors you mentioned using razrutility 1.51 are to be expected and exactly what i saw. (i have been trying many different things on my phone so i have bricked and used this method many times).
As for the error you receive while doing the actual update in stock recovery, i have not seen that. Not to insult your Intel but did you make sure you are using the right update zip? Every leaked update coming from 181 has the same name so it could be that you have the wrong one.
Sent from my DROID RAZR using Xparent Purple Tapatalk
#188
Posted 20 May 2012 - 03:25 PM
I have followed the instructions and im still bircked. This my first post here so i will give all the details:
Phone - XT912 Verizon
Boot loader -0A.6C
Used Driod RAZR ICS installer v1.0 and went back to a clean install of 173, then accepted the 181 update adn then installed ICS. After a few days of clean operation, i decided to try a Theme for ICS but after the flash the phone app, contacts app and several other apps starting to stop working so I tried to reverse the flash but my problems did not go away. I then did a factory wipe with no change so i decided to flash the ROM again and of course i bricked it. I have tried everything but so far i have been unable to unbrick. I downloaded "VRZ_XT912_6.5.1-167_DHD-14_M3-8_CFC_1FF_01.xml" and modified the Droid RAZR 1.51 and ran it with option 1 and i get INFOPreflash validation failure for cdt.bin, devtree, boot, and recovery. I was hoping that this were the expected errors from the fastboot compatibility. I then copied "Blur_Version.6.12.181.XT912.Verizon.en.US" to the SD card and tried to updated from Recovery but i recieved an error code 7 when it attempted to verify the system.
What did i do wrong?
I also had the error code 7 using a modded 1.51 utility. I downloaded 6.1 and it finally worked properly. May work for you as well.
#189
Posted 20 May 2012 - 05:08 PM
I also had the error code 7 using a modded 1.51 utility. I downloaded 6.1 and it finally worked properly. May work for you as well.
Where do i find 6.1, the link on the first page has expired?
Believe me you cannot insult my intel because it is all gone...lol...i used the link on the first page to download 181. do you have a link that you know is good?
#190
Posted 20 May 2012 - 05:29 PM
Where do i find 6.1, the link on the first page has expired?
Believe me you cannot insult my intel because it is all gone...lol...i used the link on the first page to download 181. do you have a link that you know is good?
You'll need to install utorrent or similar to download the file.
#191
Posted 20 May 2012 - 06:01 PM
I have followed the instructions and im still bircked. This my first post here so i will give all the details:
Phone - XT912 Verizon
Boot loader -0A.6C
Used Driod RAZR ICS installer v1.0 and went back to a clean install of 173, then accepted the 181 update adn then installed ICS. After a few days of clean operation, i decided to try a Theme for ICS but after the flash the phone app, contacts app and several other apps starting to stop working so I tried to reverse the flash but my problems did not go away. I then did a factory wipe with no change so i decided to flash the ROM again and of course i bricked it. I have tried everything but so far i have been unable to unbrick. I downloaded "VRZ_XT912_6.5.1-167_DHD-14_M3-8_CFC_1FF_01.xml" and modified the Droid RAZR 1.51 and ran it with option 1 and i get INFOPreflash validation failure for cdt.bin, devtree, boot, and recovery. I was hoping that this were the expected errors from the fastboot compatibility. I then copied "Blur_Version.6.12.181.XT912.Verizon.en.US" to the SD card and tried to updated from Recovery but i recieved an error code 7 when it attempted to verify the system.
What did i do wrong?
You downloaded the wrong update file. Which version of the ics leak were you on?
check this server for the corresponding leak you flashed, download the correct file and then repeat the whole process however you have to find a way to get the file to your sdcard.
EDIT: PLEASE, tell me you read the OP and know that you can not get back to GB (.181) because if you are that stupid then guess what? YOUR STUCK ON ICS WITH LITTLE TO NO ROMS TO FLASH.
#192
Posted 20 May 2012 - 07:10 PM
Thanks for the confidence boost....lol . ...no seriously, i have been running ICS sence before the first leak and i cant see any reason to go back..i'm downloading the new file now...Thanks, i will let everyone here know how i make out...You downloaded the wrong update file. Which version of the ics leak were you on?
check this server for the corresponding leak you flashed, download the correct file and then repeat the whole process however you have to find a way to get the file to your sdcard.
EDIT: PLEASE, tell me you read the OP and know that you can not get back to GB (.181) because if you are that stupid then guess what? YOUR STUCK ON ICS WITH LITTLE TO NO ROMS TO FLASH.
Im up and working Thanks to everyone. This does work and works great!
Edited by Batman01, 20 May 2012 - 07:38 PM.
#193
Posted 22 May 2012 - 04:34 AM
#194
Posted 22 May 2012 - 10:43 AM
#195
Posted 22 May 2012 - 09:25 PM
#196
Posted 22 May 2012 - 09:46 PM
Sent from my XT912 using Tapatalk 2
#197
Posted 26 May 2012 - 05:57 PM
I can do step 1 and fastboot with errors, but when I go to recovery, I get the android picture with the red exclamation. Is there anyway around this?
#198 Guest_BDH_*
Posted 26 May 2012 - 06:07 PM
Ok, I was a bonehead and accidently formatted my system partition while in bootstrap before i flashed a new rom. Anyway, I am not able to get any of this stuff to work.
I can do step 1 and fastboot with errors, but when I go to recovery, I get the android picture with the red exclamation. Is there anyway around this?
When you get to the android with red triangle, press both volume buttons at the same time
Sent from my XT912 using Tapatalk 2
#199
Posted 26 May 2012 - 06:08 PM
Ok, I was a bonehead and accidently formatted my system partition while in bootstrap before i flashed a new rom. Anyway, I am not able to get any of this stuff to work.
I can do step 1 and fastboot with errors, but when I go to recovery, I get the android picture with the red exclamation. Is there anyway around this?
Press both volume keys at same time that should get you moto recovery from that screen.
Sent from my DROID RAZR using Tapatalk 2
#200
Posted 26 May 2012 - 06:30 PM
Press both volume keys at same time that should get you moto recovery from that screen.
Sent from my DROID RAZR using Tapatalk 2
Thanks! I thought I was hosed....updating now...hopefully this fixes my brick. I appreciate the help!
3 user(s) are reading this topic
0 members, 3 guests, 0 anonymous users