#1
Posted 06 August 2012 - 03:11 AM
Rooted my Razr, installed ics ota, rooted phone, installed 215 leak and Titanium back up on SD. Installed and removed safe boot. I am on stock ROM have downloaded no customs. Phone will not boot up. Goes to Logo and then shuts down. I cannot get into the phone to reach the Titanium back up. Can anyone help?
Thanks
datercon
#2
Posted 06 August 2012 - 03:27 AM
Hi
Rooted my Razr, installed ics ota, rooted phone, installed 215 leak and Titanium back up on SD. Installed and removed safe boot. I am on stock ROM have downloaded no customs. Phone will not boot up. Goes to Logo and then shuts down. I cannot get into the phone to reach the Titanium back up. Can anyone help?
Thanks
datercon
Have you tried going into Moto's recovery and doing a factory reset?
#3
Posted 06 August 2012 - 05:08 AM
Yes, unfortunately the only screen that I can get to remain up by pushing the power and volume down keys is the fast boot screen. Pushing power, volume down, and volume up does not work, the logo comes up and the system shuts down.Have you tried going into Moto's recovery and doing a factory reset?
Thanks for your help
Datercon
#4
Posted 06 August 2012 - 05:12 AM
Sent from my simplex maxx
#5
Posted 06 August 2012 - 05:14 AM
+1Have you tried using Matt's util 1.8.1 and fastboot your razr back to stock. 211??
Sent from my simplex maxx
#6
Posted 06 August 2012 - 05:23 AM
Hello neur0tk. I would like to try this but how do I use Matt's utility if I cannot get it on to the razr?+1
Thanks
#7
Posted 06 August 2012 - 05:25 AM
Hello neur0tk. I would like to try this but how do I use Matt's utility if I cannot get it on to the razr?
Thanks
If you can get to the fastboot screen like you said, that is where you would want to be when you use the utility.
#8
Posted 06 August 2012 - 05:26 AM
Hello neuro0tk, I am reposting as I just realized that the last reply went to "gbrooke". I am not sure why s/he is in the thread with a "+1". At any rate, how do I use Matt's utility 1.8 if I cannot get on to my razr?Have you tried using Matt's util 1.8.1 and fastboot your razr back to stock. 211??
Sent from my simplex maxx
Thanks
Datercon
#9
Posted 06 August 2012 - 05:41 AM
Hello neuro0tk, I am reposting as I just realized that the last reply went to "gbrooke". I am not sure why s/he is in the thread with a "+1". At any rate, how do I use Matt's utility 1.8 if I cannot get on to my razr?
Thanks
Datercon
"+1" just means "I agree with this person", or "Count me as an additional person that would have told you the same thing if they had not beat me to it."
Download the tool, install Moto drivers, put your phone into Fastboot mode, plug your phone into your computer, run the option to install/restore .211 (should be option 1, but I haven't opened the tool in quite a while).
#10
Posted 06 August 2012 - 05:43 AM
Thank you neur0tk, I have learned something. Also, I went to Matt's utility and I see that he provides a lot of information that would answer my previous question. Should have gone there first, apologies."+1" just means "I agree with this person", or "Count me as an additional person that would have told you the same thing if they had not beat me to it."
Datercon
#11
Posted 06 August 2012 - 05:58 AM
Sent from my GT-P3113 using Tapatalk 2
Visit DRDevs.com hosting site for all official Droidrzr.com ROMs, Apps, GApps and other mods/files!!
Please PM me if you need help!
I will be hosting AOSP-Based ROM GApps packages!
Download the most Up-to-Date GApps Packages for AOSP ROMs from me here!
#12
Posted 06 August 2012 - 08:01 AM
HelloMatt 1.81 utility is a tool that's run from a pc with your razr plugged into it (and in ap fastboot mode). It is not a tool that is run on the actual phone. It's designed to restore a phone back to stock even if the phone is unresponsive.
Sent from my GT-P3113 using Tapatalk 2
Excuse the delay in response. I have plugged in my phone (solid white light is showing in the upper left hand corner) and I have loaded the drivers and utility on to my PC. I cannot get my phone into fast boot mode. I have tried pushing the up and down volume plus power numerous times and I have removed the SD card to no avail. Do you have any ideas about where I can go next?
#13
Posted 06 August 2012 - 10:54 AM
Hello
Excuse the delay in response. I have plugged in my phone (solid white light is showing in the upper left hand corner) and I have loaded the drivers and utility on to my PC. I cannot get my phone into fast boot mode. I have tried pushing the up and down volume plus power numerous times and I have removed the SD card to no avail. Do you have any ideas about where I can go next?
Ok wait, from a powered off state you need to press and hold Vol +, Vol - and Power all at the same time. Push and hold down all 3 together. Hold them for about 5 second. You should then get loaded into the bootloader screen. That's not happening? You make actually have another problem with your phone that you didn't cause if you can't even get the bootloader up.
Visit DRDevs.com hosting site for all official Droidrzr.com ROMs, Apps, GApps and other mods/files!!
Please PM me if you need help!
I will be hosting AOSP-Based ROM GApps packages!
Download the most Up-to-Date GApps Packages for AOSP ROMs from me here!
#14
Posted 13 August 2012 - 02:52 AM
Please excuse the delayed response. I have been working on this issue continuously to no avail. My battery is totally dead. I purchased a Motorola programming cable and located an adapter to take it from mini to micro connection. The literature indicates that the cable is used to program Motorola Radios, however it was the only programming cable that I found available on the forums.
The cable carries no power, so as a result the phone would neither charge or power on. All of the tricks (hold plus minus, plug in charger, navigate to "PB Tools, volume up) do not work. The phone simply continues to return to the Moto icon. I have learned how to navigate the fast boot and recovery screens but they obviously cannot be used without battery power.
I understand that one can take the phone apart and "hotwire" the battery. This looks pretty risky to me.
Any additional thoughts would be appreciated, tho I think that I have taken this about as far as I can.
Thanks again
#15
Posted 13 August 2012 - 03:14 AM
It's designed to give enough electricity to allow the phone to operate while flashing but not enough to charge it. As a matter of fact using this cable to flash doesn't even require a battery at all.
#16
Posted 13 August 2012 - 04:36 AM
No. I wanted to purchase this one, however it was "out of stock". The part number that I purchased is HKLN4280A, model number RKN4155A
#17
Posted 13 August 2012 - 04:57 AM
Hi
No. I wanted to purchase this one, however it was "out of stock". The part number that I purchased is HKLN4280A, model number RKN4155A
All I can suggest at this point then is to make your own or wait until stock becomes available. Whatever you decide to do, keep an eye out on TBH site and order one as soon as they become available. This should be the one piece of equipment in everyones arsenal if you're interested in flashing
EDIT: The cable you have is for 2 way radios, not cell phones
#18
Posted 13 August 2012 - 06:02 AM
If you know... Once I have re charged the phone and can get to the fastboot screen. I have backed up all of my settings (rooted using ICS 215 leak) on to my sdcard using Titanium back up.
My Question: Can I get to the SD card to use to TItanium to restore by using the "recovery" option, or should I use Matt's utility 1.81 to root back to stock?
Thanks again
#19
Posted 13 August 2012 - 07:36 AM
Here is another factory cable:
One of the members on here has ordered one and confirmed it works like the TBH cable linked to earlier.
#20
Posted 13 August 2012 - 08:04 AM
Thanks Again, this has been a big help
Also tagged with one or more of these keywords: Titanium, Rooted, ICS, lead 215
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users