What else we can do? As far as i know Recovery partition was erased, is there any chance to install it, again?
Motorola Razr xt890i
#21
Posted 22 May 2014 - 09:10 PM
#22
Posted 23 May 2014 - 06:11 AM
I don't have any more advice for you. Fastboot fails because you didn't follow the directions I gave you. RSD isn't working which is why I said to try fastboot with the specific file I went and found for your device.
Non potest esse nisi unus
#23
Posted 23 May 2014 - 10:34 AM
Sorry for late reply, just get back home.
I follow all steps which You suggest me. I tried House of Moto 2.2 first of all (later on 2.3) and really don't know what i'm doing wrong, because it seems to be working fine at the beginning. Can You have a look on the pictures and tells me where is my fault?
Thanks in advance
Btw. RSD starts in House of Moto after few commands.
If recovery partition was erased is it linked anyhow with Your program?
#24
Posted 23 May 2014 - 10:57 AM
Nope, my program doesn't erase anything until the script tells it to, and it most certainly doesn't tell it to erase the recovery partition. Run the createLog program again and I'll show you what you did wrong and why fastboot mode (which is what you need....RSD is NOT going to fix this else we'd not be using the House of Moto for this in the first place) isn't working.
Non potest esse nisi unus
#25
Posted 23 May 2014 - 11:05 AM
My dear friend that's misunderstood. I didn't mean that Your program erase recovery partition, i've used another program on another site before You sent me a link to Yours. I'll create Log program again (which version of House of Moto should i fire it up?? )
#26
Posted 24 May 2014 - 07:00 AM
Ok. folks just to let You know, friend of mine advice me to try such a commands (i had a chat with him over the internet)
1. CMD: fastboot oem get_unlock_data
fastboot oem get_unlock_data
...
(bootloader) 3A25150915586129#54413233373034
(bootloader) 48354100000000000000000000#1ACF
(bootloader) 4FDA6DCEE30F10CACA1F7FC1CBD39CB
(bootloader) 08BBF#DFF3ABAE76852954D805ED6EF
(bootloader) 3FA0000
OKAY [ 0.290s]
finished. total time: 0.290s
2. fastboot oem unlock PJYERHAJMZMPVYSRKIXN
fastboot oem unlock PJYERHAJMZMPVYSRKIXN
...
(bootloader) BLKDISCARD ioctl /dev/block/mmcblk0 fail
(bootloader) Erase userdata fail
(bootloader) General Unlock failure!
(bootloader) OEM unlock failure!
FAILED (remote failure)
finished. total time: 8.390s
In Motorola phone it says
Unlock
Fastboot command failed
He said that partition table is faulty. It can be done only in Linux or JTAG.
We tried this as well:
CMD: fastboot format data
(bootloader) Variable not supported!
formatting 'data' partition...
(bootloader) Variable not supported!
FAILED (remote failure)
FAILED (remote failure)
finished. total time: 0.342s
He said that emmc is faulty and that's why fastboot doesn't work.
Any advice on this, please?
#27
Posted 24 May 2014 - 07:05 AM
That's beyond anything anyone on this forum can help you with. JTag is not a software thing. It's a piece of hardware that allows you to reflash the phone in a very special way.
Non potest esse nisi unus
#28
Posted 24 May 2014 - 07:08 AM
jtag is not for goofing around by most people.
- asgaard likes this
#29
Posted 24 May 2014 - 07:13 AM
So any advice? Sell it as faulty or try something else?
#30
Posted 25 May 2014 - 01:17 PM
This afternoon I was in few repair shops in Dublin and none of them can fixed as they stated that Motorola isn't so popular in IRL. Mostly i heard "i have no clue" or "You have to send to manufacturer". One of them tried fixed (it takes roughly 3 hours), but also gave up. He said that it's nearly same story with chip which Samsung S3 had. Don't ask me what does it mean, cuz have no idea. Friend of mine who's also user on another forum about phones will fix it as he stated, but don't know if i gonna send it to Poland. At this stage i have to stop any more tests with Motorola as i don't know what i have to do.
Thanks for all support and will keep You inform if something turn up.
Btw. one of Chinese "call him tech-e" broked back cover of Motorola (beside camera, cracked glass), but i noticed it when i left his repair centre.
#31
Posted 09 June 2014 - 11:44 PM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users