165 replies to this topic

[superrelaxx]

I have been trying to load this file for the last two days but i keep geting an error message (The system cannot find the path specified )
My phone is rooted, i have even troed to restore back to original with no success. It's as if the utility does not see my phone.
Any advice?

When you unzipped the file, are all of the files in the same location?

Folder
-Files (folder)
-DroidRAZRUtility.bat (or whatever it's called)

[royboy14]

When you unzipped the file, are all of the files in the same location?

Folder
-Files (folder)
-DroidRAZRUtility.bat (or whatever it's called)

yes it is

[Makatomotors]

so im having some issues...
so i was trying to flash a boot logo.. and not knowing hat i was doing. I was using saftestrap 1.9.
I installed zip from sd card and afterwords.
when i rebooted... it gave me the ap flashboot (s) Boot fauilure
Im constantly running into the low battery issue but try to keep it charged

But i was using utilities 1.42 trying to flash to .713

i was advised to try 1.6.

I havent fully gotten it to try finish w/o out the baterry low error failing stuff.
But before i ge the battery low stuff i do get 2 sepearte errors one of whice is the logo.bin (which is what caused this entire problem)
I'm letting it charge again but any ideas if this is going to be a major problem with the logo.bin error

Thanks


*Went ahead with the full run.. and I'm back up and running!!* WOOOO

[nothing0]

Is there a mac version with the 181 fastboot files?

[tdperry]

Found a few nits. Normal or will this present a problem?

[*] Simple Razr Restore
[*] Windows Version
[*] Created by mattlgroff (with help from dhacker29!)
[*] Follow us @mattlgroff @dhacker29 or on DroidRZR.com
[*]
[*] Before continuing, ensure your Razr is in the
[*] "AP Fastboot" mode and connected via USB.
[*] (Press both volume buttons when it boots the the triangle,
[*] choose wipe cache, and then reboot.)
[*]--- Also press the keys after the screen flashes back on when asked---
[*] IF YOUR PHONE SAYS STATUS 1 UNLOCKED EXIT NOW AND EMAIL ME
[*] YOU HAVE AN UNLOCKED BOOTLOADER! ! ! ! !
[*] mattlgroff@gmail.com RUNNING THIS WILL LOCK YOUR BOOTLOADER!
[*]
[*] Press enter to restore your phone to 6.12.181...
Press any key to continue . . .
< waiting for device >
sending 'mbm' (512 KB)... OKAY [ 0.080s]
writing 'mbm'... OKAY [ 0.550s]
rebooting into bootloader... OKAY [ 0.250s]
Press any key AFTER the screen comes back on
Press any key to continue . . .
sending 'mbmloader' (42 KB)... OKAY [ 0.015s]
writing 'mbmloader'... OKAY [ 0.296s]
sending 'mbm' (512 KB)... OKAY [ 0.285s]
writing 'mbm'... OKAY [ 3.270s]
rebooting into bootloader... OKAY [ 0.270s]
Press any key AFTER the screen comes back on
Press any key to continue . . .
erasing 'userdata'... OKAY [ 0.790s]
erasing 'cache'... OKAY [ 0.145s]
sending 'cdt.bin' (16 KB)... OKAY [ 0.010s]
writing 'cdt.bin'... OKAY [ 1.030s]
sending 'devtree' (512 KB)... OKAY [ 0.290s]
writing 'devtree'... OKAY [ 0.500s]
error: cannot load 'files\logo.bin'

sending 'system' (262144 KB)... OKAY [ 32.071s]
writing 'system'... OKAY [ 21.263s]
sending 'system' (262144 KB)... OKAY [ 31.543s]
writing 'system'... OKAY [ 22.784s]
sending 'system' (130816 KB)... OKAY [ 15.400s]
writing 'system'... OKAY [ 11.661s]
sending 'boot' (8192 KB)... OKAY [ 0.950s]
writing 'boot'... OKAY [ 1.804s]
sending 'recovery' (9216 KB)... OKAY [ 1.105s]
writing 'recovery'... OKAY [ 1.440s]
sending 'ebr' (16 KB)... OKAY [ 0.251s]
writing 'ebr'... OKAY [ 0.470s]
sending 'mbr' (16 KB)... OKAY [ 0.240s]
writing 'mbr'... OKAY [ 0.450s]
error: cannot load 'files\cdrom'

sending 'preinstall' (262144 KB)... OKAY [ 31.425s]
writing 'preinstall'... OKAY [ 23.104s]
sending 'preinstall' (262144 KB)... OKAY [ 30.546s]
writing 'preinstall'... OKAY [ 23.985s]
sending 'preinstall' (98304 KB)... OKAY [ 10.764s]
writing 'preinstall'... OKAY [ 8.426s]
sending 'webtop' (262144 KB)... OKAY [ 33.107s]
writing 'webtop'... OKAY [ 23.045s]
sending 'webtop' (262144 KB)... OKAY [ 28.904s]
writing 'webtop'... OKAY [ 22.629s]
sending 'webtop' (262144 KB)... OKAY [ 31.323s]
writing 'webtop'... OKAY [ 22.758s]
sending 'webtop' (262144 KB)... OKAY [ 31.772s]
writing 'webtop'... OKAY [ 21.968s]
sending 'webtop' (262144 KB)... OKAY [ 31.814s]
writing 'webtop'... OKAY [ 22.220s]
sending 'webtop' (54016 KB)... OKAY [ 6.451s]
writing 'webtop'... OKAY [ 5.176s]
sending 'radio' (21848 KB)... OKAY [ 2.395s]
writing 'radio'... OKAY [ 2.600s]
erasing 'userdata'... OKAY [ 0.990s]
erasing 'cache'... OKAY [ 0.125s]
sending 'radio' (21848 KB)... OKAY [ 2.455s]
writing 'radio'... OKAY [ 2.018s]
sending 'radio' (21848 KB)... OKAY [ 2.788s]
writing 'radio'... OKAY [ 3.105s]
rebooting...

Please make a selection or hit ENTER to return:

[Droid_Razr]

Same errors I had when I flashed mine.

[Brad92]

Found a few nits. Normal or will this present a problem?

[*] Simple Razr Restore
[*] Windows Version
[*] Created by mattlgroff (with help from dhacker29!)
[*] Follow us @mattlgroff @dhacker29 or on DroidRZR.com
[*]
[*] Before continuing, ensure your Razr is in the
[*] "AP Fastboot" mode and connected via USB.
[*] (Press both volume buttons when it boots the the triangle,
[*] choose wipe cache, and then reboot.)
[*]--- Also press the keys after the screen flashes back on when asked---
[*] IF YOUR PHONE SAYS STATUS 1 UNLOCKED EXIT NOW AND EMAIL ME
[*] YOU HAVE AN UNLOCKED BOOTLOADER! ! ! ! !
[*] mattlgroff@gmail.com RUNNING THIS WILL LOCK YOUR BOOTLOADER!
[*]
[*] Press enter to restore your phone to 6.12.181...
Press any key to continue . . .
< waiting for device >
sending 'mbm' (512 KB)... OKAY [ 0.080s]
writing 'mbm'... OKAY [ 0.550s]
rebooting into bootloader... OKAY [ 0.250s]
Press any key AFTER the screen comes back on
Press any key to continue . . .
sending 'mbmloader' (42 KB)... OKAY [ 0.015s]
writing 'mbmloader'... OKAY [ 0.296s]
sending 'mbm' (512 KB)... OKAY [ 0.285s]
writing 'mbm'... OKAY [ 3.270s]
rebooting into bootloader... OKAY [ 0.270s]
Press any key AFTER the screen comes back on
Press any key to continue . . .
erasing 'userdata'... OKAY [ 0.790s]
erasing 'cache'... OKAY [ 0.145s]
sending 'cdt.bin' (16 KB)... OKAY [ 0.010s]
writing 'cdt.bin'... OKAY [ 1.030s]
sending 'devtree' (512 KB)... OKAY [ 0.290s]
writing 'devtree'... OKAY [ 0.500s]
error: cannot load 'fileslogo.bin'

sending 'system' (262144 KB)... OKAY [ 32.071s]
writing 'system'... OKAY [ 21.263s]
sending 'system' (262144 KB)... OKAY [ 31.543s]
writing 'system'... OKAY [ 22.784s]
sending 'system' (130816 KB)... OKAY [ 15.400s]
writing 'system'... OKAY [ 11.661s]
sending 'boot' (8192 KB)... OKAY [ 0.950s]
writing 'boot'... OKAY [ 1.804s]
sending 'recovery' (9216 KB)... OKAY [ 1.105s]
writing 'recovery'... OKAY [ 1.440s]
sending 'ebr' (16 KB)... OKAY [ 0.251s]
writing 'ebr'... OKAY [ 0.470s]
sending 'mbr' (16 KB)... OKAY [ 0.240s]
writing 'mbr'... OKAY [ 0.450s]
error: cannot load 'filescdrom'

sending 'preinstall' (262144 KB)... OKAY [ 31.425s]
writing 'preinstall'... OKAY [ 23.104s]
sending 'preinstall' (262144 KB)... OKAY [ 30.546s]
writing 'preinstall'... OKAY [ 23.985s]
sending 'preinstall' (98304 KB)... OKAY [ 10.764s]
writing 'preinstall'... OKAY [ 8.426s]
sending 'webtop' (262144 KB)... OKAY [ 33.107s]
writing 'webtop'... OKAY [ 23.045s]
sending 'webtop' (262144 KB)... OKAY [ 28.904s]
writing 'webtop'... OKAY [ 22.629s]
sending 'webtop' (262144 KB)... OKAY [ 31.323s]
writing 'webtop'... OKAY [ 22.758s]
sending 'webtop' (262144 KB)... OKAY [ 31.772s]
writing 'webtop'... OKAY [ 21.968s]
sending 'webtop' (262144 KB)... OKAY [ 31.814s]
writing 'webtop'... OKAY [ 22.220s]
sending 'webtop' (54016 KB)... OKAY [ 6.451s]
writing 'webtop'... OKAY [ 5.176s]
sending 'radio' (21848 KB)... OKAY [ 2.395s]
writing 'radio'... OKAY [ 2.600s]
erasing 'userdata'... OKAY [ 0.990s]
erasing 'cache'... OKAY [ 0.125s]
sending 'radio' (21848 KB)... OKAY [ 2.455s]
writing 'radio'... OKAY [ 2.018s]
sending 'radio' (21848 KB)... OKAY [ 2.788s]
writing 'radio'... OKAY [ 3.105s]
rebooting...

Please make a selection or hit ENTER to return:

It says in the first post that those usually fail and its okay. They failed on mine. I know the first one is the boot logo.

And I just wanted to say that I love this utility. I used to use a Linux sbf CD for my Droid X, but this is even easier and faster. I also like that it has everything I need to get set back up again.

Sent from my DROID RAZR using Tapatalk 2

[Nnnnr12]

This thing wont root my phone is says its all read-only

[mikeramos90]

Hey guys,

I am currently running .79 on my razr and when i try to use the utility, it just pops up flashes some text and closes before i can read it. is there some sort of ultra-secret thing im supposed to do? im just trying to get back to .181

thank you

Mike

[G8orDroid]

Hey guys,

I am currently running .79 on my razr and when i try to use the utility, it just pops up flashes some text and closes before i can read it. is there some sort of ultra-secret thing im supposed to do? im just trying to get back to .181

thank you

Mike

Sound like you didn't extract the the zip file.

Sent from my DROID RAZR using Tapatalk 2

[wyld]

This thing wont root my phone is says its all read-only

What OS are you on? .181 stock? Are you on a leak ICS?

[mikeramos90]

Sound like you didn't extract the the zip file.

Sent from my DROID RAZR using Tapatalk 2

do i need to extract the zip to a different folder?

[wyld]

do i need to extract the zip to a different folder?

extract to desk top

[claps1775]

For some reason this morning, my computer would not recognise my phone when I was in 1.61 and same as rsd lite. If the battery is say at 30%, will it still work or is something else wrong? Last night it was working fine. I went back to gb only because of the roomer of ics ota on the 12th. I got my phone to get the updates from 744 to 181. It would show connecting for a while and then it finally got the download for the updates. All good now but somethings there are ghosts in the system I believe.

I have Moto Razr....I will cut you.

[wyld]

For some reason this morning, my computer would not recognise my phone when I was in 1.61 and same as rsd lite. If the battery is say at 30%, will it still work or is something else wrong? Last night it was working fine. I went back to gb only because of the roomer of ics ota on the 12th. I got my phone to get the updates from 744 to 181. It would show connecting for a while and then it finally got the download for the updates. All good now but somethings there are ghosts in the system I believe.

I have Moto Razr....I will cut you.

Maybe update your drivers and or a different USB cable?

Sent from my DROID RAZR using Tapatalk 2

[claps1775]

I had the drivers what were included with the 1.61 final. I will have to try that next time.

I have Moto Razr....I will cut you.

[seanren78]

For some reason this morning, my computer would not recognise my phone when I was in 1.61 and same as rsd lite. If the battery is say at 30%, will it still work or is something else wrong? Last night it was working fine. I went back to gb only because of the roomer of ics ota on the 12th. I got my phone to get the updates from 744 to 181. It would show connecting for a while and then it finally got the download for the updates. All good now but somethings there are ghosts in the system I believe.

I have Moto Razr....I will cut you.

I would go to your "msconfig" check your services and make sure that your "motorola device services" are checked. The service may not be active so check to make sure. Select that "motorola device services" + apply and reboot. May help.

[claps1775]

When I got home from work. It worked just fine. Not sure. Ghost in my computer.

I have Moto Razr....I will cut you.

[mikeramos90]

hey guys extracting to the desktop was just what it needed. thanks a alot!

[sag_tarkhala]

Please note, cdrom and logo.bin tend to fail to flash. This is normal and OK. Won't affect the restore.


Key Features

• Root Gingerbread AND Ice Cream Sandwich (6.14.84 and 6.14.85 tested and confirmed.)
• Unroot
• Restore to stock 6.12.181 Gingerbread with full fastboot files. Also includes the xml for RSD Lite use. (Will NOT downgrade you from ICS 6.12.84 or ICS 6.12.85 or ICS 6.16.203)
• Install overclock files to Gingerbread AND Ice Cream Sandwich (6.14.84 and 6.14.85 tested and confirmed.)
• ADB Shell
• Easy install of Voodoo's OTA Rootkeeper, Bootstrap (GB and ICS), and Safestrap.
• Reboot phone (if USB Debugging is enabled)
• Includes the Motorola USB drivers compatible with both Gingerbread AND Ice Cream Sandwich.

Downloads

• Goo-inside:

  Please Login or Register to see this Hidden Content

• Droidhive:

  Please Login or Register to see this Hidden Content

• Filefactory:

  Please Login or Register to see this Hidden Content

FAQs

• It says "file cannot be found" or something like that...help!
  
  Don't just extract the batch file. Extract the entire zip archive. Do NOT run as administrator. Install the included drivers, etc.

• Can I go directly to 6.12.181 with this from _.__.___ ???
  
  Yes. UNLESS you are on ICS 6.14.84 or 6.14.85 or 6.16.203 you can go directly to this.

Special Thanks

· dhacker29 for being very helpful and telling me commands I was blanking on...generally being awesome!

· DroidTh3ory for being very helpful at many times...generally being awesome.

· P3Droid for helping me out from time to time.

· Hashcode for always knowing everything...and in the rare cases he doesn't know, he knows who does!

​

Please Login or Register to see this Hidden Content

is this compatible with xt910??

[Brad92]

is this compatible with xt910??

No, this flashes the CDMA fastboot file. Root and the other tools would most likely work.

[jmonroe0914]

Thanks =] This is easily the best tool out there

[blankemail]

i recently flashed .79 ICS and i no longer have the "charge only" option when connecting to USB, and i cannot restore root with Voodoo

I know i can just FB back to .181 but i would like to check out some leak only ROMs first. How do i enable "charge only" mode on .79 so i can use this utility to root my phone?

EDIT** the only options i have when i plug into USB are mass storage, media device(MTP) or camera(PTP)

[alticoupe]

So I was on rooted .181 went to do fast boot to restore .181 for upgrade to .79

but now im stuck in bootloader goes though first 2 stages but when it copys 'system' and then writes 'system' it hangs forever on

writing system ...

i left it for 20 mins and nothing!!!

any thoughts? fixable?

[blankemail]

So I was on rooted .181 went to do fast boot to restore .181 for upgrade to .79

but now im stuck in bootloader goes though first 2 stages but when it copys 'system' and then writes 'system' it hangs forever on

writing system ...

i left it for 20 mins and nothing!!!

any thoughts? fixable?

it took quite a while for mine to go through that stage, keep patient it should finish...

[alticoupe]

20 mins+ though... seems like something is wrong

[Brad92]

i recently flashed .79 ICS and i no longer have the "charge only" option when connecting to USB, and i cannot restore root with Voodoo

I know i can just FB back to .181 but i would like to check out some leak only ROMs first. How do i enable "charge only" mode on .79 so i can use this utility to root my phone?

EDIT** the only options i have when i plug into USB are mass storage, media device(MTP) or camera(PTP)

ICS has the charge only option removed for some reason. And Voodoo worked for me, but you should be able to use the utility to root ICS

[blankemail]

ICS has the charge only option removed for some reason. And Voodoo worked for me, but you should be able to use the utility to root ICS

i just needed to update motorola drivers. for some reason the old ones i used on my droid x worked when i was using .181 but not on .79

[stealthmouse]

Matt,

Though I had a good non-safe backup, something was messed up on my stock backup, and I messed around with different straps to the point that I basically ensured that my checksum would fail. End result, I needed the 181 build, which I did before by just hijacking it into the Linux 173 utility, but I recall it had some hiccups doing it that way (not to mention that softbrickedness was near at hand for anyone with not terminal experience).

End result - I pretty much copied and pasted all of your 1.6 Utility for PC into the 1.42 MacLinux Utility so that it now performs the same functions but for those on a Mac or Linux machine. I left the same warning about 64- versus 32-bit machines, and of course since I'm on a 64-bit, it wasn't like I had any personal reason to swap the files out. Also, I've only tested it out for the selfish things I was working on, so whoever is on an ICS build who wants to flash back to 181, have at it. But I can tell you, the 181 flash works, root works, Safestrap 2.00 works (I added it to the menu, leaving 1.09 for whoever could need it, though I almost just added a line that if you need it, just Google hashofcodes and find it yourself). I need to confirm that a couple other references aren't causing run errors, then it will be in better than beta shape, for you to do with as you wish. i also named it Mac 1.60, but I wasn't sure how you would name it, and can call it 1.43 or whatever other name you want.

As far as explaining how to run it, it seems that by now that should be covered elsewhere, but there are fewer Mac write-ups, so I'll probably put something together to that effect. Who knows? Maybe you'll get bombarded slightly less on the next build.

Cheers.

[alticoupe]

After trying to flash back to .181 phone I think is bricked. Will not start just goes to boot loader saying "boot failed" cant get to recovery or anything besides ap fast boot.

When i try to fastbook with the util it will get to the part where it needs to write the system the second time and hangs....

left for over an hour and nothing still hainging on " writing 'system' ... "

Any thoughts no if i can fix this type of brick or am i screwed?? there an SBF file i can use to flash over? cant find one out there only fast boot files.